GUDEL FlexxPump4 N Operating Manual Download Page 16

Page: 16 / 177

2.1.2

Explanation of warning symbol

Warning notes for personal injuries contain the symbol of the corresponding
hazard.

Symbol

Explanation of symbols

Hazards due to general causes

Hazards due to environmental pollution

Hazards due to dangerous electrical voltage

Tab. 2-1

Explanation of warning symbol

2.2

Product safety

Residual danger

The product is built using state-of-the-art technology. It was designed and
constructed in accordance with the accepted safety regulations. However,
some residual danger remains during its operation.

There is danger to the personal safety of the operator as well as for the prod-
uct and other property.

Use

When operating the product, observe this manual and ensure that the prod-
uct is always in perfect working order.

The product must never be modified or used in a manner contrary to its in-
tended use.

Safety

OPERATING MANUAL FlexxPump4 N Lubrication System

3422906891_v1.0_

EN-US

Summary of Contents for FlexxPump4 N


















































































































































































Search results

Summary of Contents for FlexxPump4 N

Reviews:

Related manuals for FlexxPump4 N

Brands by name

Popular brands

GUDEL FlexxPump4 N, Operating Manual

Search results

Summary of Contents for FlexxPump4 N

Reviews:

Related manuals for FlexxPump4 N

Brands by name

Popular brands