GUDEL FlexxPump4 B, Operating Manual

Page: 91 / 157

7.3.3 Maintenance tasks after 10,000 hours
7.3.3.1 Cleaning and checking lubrication system
Fig. 7-7 Cleaning and checking lubrication system
Cleaning agents
mild universal cleaner free from aromatic compounds (e.g. Motorex OPAL
5000)
Tab. 7-12 Cleaning agents: Lubrication system: Lubrication pump, lubrication lines, other components
Check the lubrication system according to the following table.
Inspection
point Description Measures
Contamination Check the components
for contamination:
• Lubricant pump
• Lubrication lines
• Other components Immediately clean away any
contamination
Loss of lubricant Check lubrication sys-
tem and its surround-
ings for traces:
• Puddles of lubricants
and lubricant traces
on the floor or in
the drip sheets
• Leaks or ripped out
lubrication lines
• Remove puddles of lubri-
cants and lubricant traces
on the floor or in the
drip sheets
• Replace leaks of ripped
out lubrication lines
Maintenance OPERATING MANUAL FlexxPump4 B lubrication system
3421295627_v1.0_
EN-US
91