Gude Profi 2500, Manual

Page: 4 / 12

GB
4
- Wear proper working clothing!
Do not wear any wide garments and jewellery that might be caught by the moving machine parts. For
working outdoors, rubber gloves and non-skid shoes are recommended. If your hair id long, wear a
hairnet. Use protective goggles.
- Wear a breathing mask when engaged in a dust-producing job.
-
Do not use the cable for any purpose it has not been designated for.
Do not use the cable for carrying or hanging of the machine.
Do not use the cable to pull out the plug
from the socket. Protect the cable from excessive temperatures, oil, and sharp edges
.
- Avoid any abnormal posture. Mind safe footing and keep balance at any time
- Take due care of your machine.
Abide by the maintenance and grinding disk replacement regulations.
Check the machine cable regularly and when it is found to be damaged, have it replaced by a skilled
electrician. Check the extension cables regularly and replace them if damaged.
Keep the handle dry, free of any dir, oil and grease.
- Unplug the machine, if it is out of use, prior to the maintenance and tools replacement, e.g. grinding
disk.
- Remove any spanners from the machine.
Before switching on, check to see that any wrenches and adjustment tools were removed.
- Avoid an unintended switching.
Use only permitted and properly marked extension cables for working outdoors.
- Be attentive. Mind what you are doing. Get down to a job only when feeling good. Never use the
machine when distracted.
- Check the machine for possible damages.
- Before using the machine, you should check any protection devices and any parts showing slight
damage to see that the function intended is perfect. Check to see that the moving parts move freely,
do not drag and are not damaged. Any parts should be installed properly to comply with the conditions
of the machine safe operation. Damage protection devices and parts should be repaired in a
recognised professional workshop and replace unless the instructions for use specify otherwise.
Damaged switched should be replaced by the customer service workshop.
Do not use a machine
with a defective ON/OFF switch
.
CAUTION!
Always connect the machine via fault current circuit breaker (FI). This machine is in compliance
with any respective safety provisions. Any repairs shall be done by professionally qualified
persons and only genuine spare parts should be used. The provision not being observed, the
operator is in a risk of injury.