
GB
6.1
Operator Safety Instructions
Use the unit only after having read the operating manual carefully.
Observe all the safety instructions contained in the manual.
Be responsible to the others
The viewer, children and animal in particular, should be kept at a sufficient distance from the
hazardous area.
Observe relevant national regulations if you operate the machine on public roads and lands.
Mind to wear safety shoes to operate the plate vibrator – it is the only way of avoiding injuries and
contusions
6.2
Step-by Step Instructions
1. Clear any foreign objects from the ground to be treated with the vibrator .
2. Always wear protection clothing .
3. Start the plate vibrator according to description in the manual. .
4. Observe all the relevant safety instructions and protection measures. .
5. Compact the ground to be treated slowly and evenly to obtain the best possible result.
7
Troubles-Causes-Troubleshooting
CAUTION: always check overloading protection first !
Trouble
Cause
Troubleshooting
Engine cannot be
started
1. Switch ON/OFF position .
2. No fuel
1. Refuel.
Engine runs
unevenly
1. Engine gas lever still in the choke
position .
2. Ignition plug loosened .
3. Dirty or dead fuel .
4. Jammed air filter .
5. Carburettor misadjusted .
6. Tank cover vent jammed .
1. Put the gas lever in position run.
2. Check the ignition plug .
3. Drain the dead fuel in a suitable
container. Pour fresh fuel in the
tank .
4. Clean the air filter .
5. Have the carburettor adjusted .
6. Clean the tank cover and the vent .
Engine runs but
the machine will
not be vibrating
1. Not fully opened gas lever .
2. V-belt loosened or broken .
1. Open the lever at full .
2. Set up/replace V-belt (see
inspections and maintenance)
The plate slats or
runs unevenly
1. Loosened or damaged dampers .
2. Surface too hard .
1. Check the dampers, retighten or
replace.
Tip:
In case of the engine faults, follow the instructions in the
B
S engine manufacturer’s
manual.
Summary of Contents for GRP-6501 B&S
