Expert Power Control NET 24x
6
7
Expert Power Control NET 24x
Configuration - IP Address
Hostname
Enter the host name
of
EPC NET 24x
.
EPC
NET 24x
uses this name
to connect with DHCP
server.
Special signs may
destabilize your net-
work.
IP Address
Here you can change the IP address of
EPC NET 24x
.
Netmask
Here you can change the netmask of
EPC NET 24x
.
Gateway
Here you can change the standard gateway of
EPC NET 24x
.
Use DHCP
Here you can set, if
EPC NET 24x
shall get its TCP/IP settings
directly from your DHCP server. If DHCP is activated,
EPC NET
24x
proves if a DHCP server is active inside of your LAN. Then
EPC NET 24x
requests TCP/IP settings from this server. If there
is no DHCP server inside of your network, we recommend to de-
activate this function.
Figure 5 Config - IP Address
