13
Expert Net Control 2312
Operating
Operating
2
Operating the device directly
2.1
The current status of the output is indicated by the color of the LED. Red indicates that the output is
off, green shows that the output is on. On the device are the buttons "select" and "ok". If you press
"select", the LED will blink for the first output, ie the output is selected. Press "select" again to select
the next output. Hold down the button "ok" for two seconds, then the status of the selected output is
toggled.
Operating by Webinterface
2.2
Access the web interface: http://"IP-address" and log-in.
The website offers an overview of the port status, measurements and sensors, if they are connected.
Furthermore, here are buttons to control the state of the ports. The ports can be switched manually
with the "On" and "Off" buttons. If the port is turned on, it can be turned off by pressing the "Reset"
button, until after a delay it turns itself on again. The delay time is determined by the parameter Reset
Duration, which is described in the chapter about configuration via web interface.
Batchmode
Each individual port can be set for a selectable period of time to the state "switch on" or "switch off".
After the selected time they are automatically switched to the second preselected state.