5
Expert Bypass Switch 8701 © 2016 Gude Analog- und Digitalsysteme GmbH
Device Description
1
Device Description
1.1
Security Advice
·
The device must be installed only by qualified personnel according to the following in-
stallation and operating instructions.
·
The manufacturer does not accept responsibility in case of improper use of the device
and particularly any use of equipment that may cause personal injury or material dam-
age.
·
The device contains no user-maintenable parts. All maintenance has to be performed
by factory trained service personnel.
·
This device contains potentially hazardous voltages and should not be opened or dis-
assembled.
·
The device can be connected only to 230V AC (50 Hz or 60 Hz) power supply sock-
ets.
·
The power cords, plugs and sockets have to be in good condition. Always connect the
device to properly grounded power sockets.
·
The device is intended for indoor use only. Do NOT install them in an area where ex-
cessive moisture or heat is present.
·
Because of safety and approval issues it is not allowed to modify the device without
our permission.
·
Please note the safety advises and manuals of connected devices, too.
·
The device is NOT a toy. It has to be used or stored out or range of children.
·
Care about packaging material. Plastics has to be stored out of range of children.
Please recycle the packaging materials.
·
In case of further questions, about installation, operation or usage of the device, which
are not clear after reading the manual, please do not hesitate to ask our support team.
·
Please, never leave connected equipment unattended, that can cause damage.
·
Connect only electrical devices that do not have limited on-time. I.e. in case of failure,
all connected appliances have to cope with a continuous on-time without causing
damage.
1.2
Content of Delivery
The package includes:
·
Expert Bypass Switch 8701
·
CD-ROM with Manual
1.3
Description
The
Expert Bypass Switch 8701
is a mechanical bypass switch for uninterrupted re-
placement of UPS systems
·
Uninterrupted replacement or maintenance of UPS systems through selection switch
without shutdown of connected loads
·
Switch position „Netz“: Connected loads are operated with mains voltage directly
Summary of Contents for Expert Bypass Switch 8701 Series
