background image

Environment protection: 

 

 

 

 

 

 

Dispose waste 

professionally so as not 

to harm the 

environment 

Packing cardboard 

material may be 

delivered to collecting 

centres for recycling. 

Any damaged and 

disposed electric or 

electronic appliances 

must be delivered to 

appropriate collecting 

centres. 

 

 

 

 

Package: 

 

 

 

 

 

 

Protect against 

moisture 

This side up 

Fragile 

 

 

 

 

Use as designed 

 
The wood splitter has exclusively been designed for splitting of firewood pieces already cut by a saw, with a 
maximum length of 1,430 mm (without the splitting cross). 
The appliance must not be used to any other works than those for which it has been designed and that are 
described in the Operating Instructions. 
Should any provision of the generally valid regulations and provision contained in these Operating 
Instructions be breached, the producer cannot be held liable for any damage. Never split any wood laid 
down or over the fibre

.

 

 

Residual risks and protective measures 

 

 Warning!!! 

 
Taking out of service, changing, blocking, disassembling, altering or adding any parts of safety and 
protective devices strictly prohibited. Failing to comply with this condition can lead to injuries 
dangerous to life. 
 
The producer cannot be held liable for any material damage or injuries of persons caused by 
negligence. 
 
Any guarantee claim towards the producer expires with the negligence described above.  

 

Mechanical residual risks 

 

Threat 

Description 

Protective measures 

Residual risk 

Contusion 

Parts of body can be contused 
or amputated due to hydraulic 
knife starting when splitting. 
 
Risk of split material getting 
stuck. When releasing the wood 
please be aware the wood is 
exposed to big stress and your 
fingers can get squeezed in the 
slot created by wood cracking.  

Always use the two-hand safety 
control. Do not interfere in the 
splitting process. 
 
 
Never work in two on the 
machine. 
 
Jammed wood needs to be 
knocked out. At doing so, make 
sure the falling piece of wood 
does not injure your legs. 

Any worn-out or damaged aid 
must immediately be replaced. 
 
 
Look out for bystanders! 
 
Always wear safety boots when 
working. 

Cut 

Parts of body can be contused 
or amputated due to hydraulic 
knife starting when splitting. 

Always use the two-hand safety 
control. Do not interfere in the 
splitting process. 

Any worn-out or damaged aid 
must immediately be replaced. 

General injury 

Fierce splitting can lead to 
serious injury when processing 
dry wood.  
 
 
 
 
 

Never interfere in the splitting 
process. 
 
Always keep a sufficient safety 
distance from the splitter. 
 
Always operate the machine 
with care and deliberately. 

Any worn-out or damaged aid 
must immediately be replaced. 
 
Always look out for bystanders. 

Summary of Contents for DHH 1050/11 T ECO

















Reviews: