GÜDE Expert Sensor Box 7213, Manual

Page: 59 / 100

59
Expert Sensor Box 7213/7214 © 2022 GUDE Systems GmbH
Specifications
snmpset -v2c -mALL -c private 192.168.1.232 epc822XPortState.1 integer 1
4.6.1
Device MIB 7213
Below is a table of all device-specific OID 's which can be accessed via SNMP. In the
numerical representation of the OID the prefix " 1.3.6.1.4.1.28507 " (Gude Enterprise
OID) was omitted at each entry in the table to preserve space. The example for a com-
plete OID would be "1.3.6.1.4.1.28507.60.1.1.1.1". A distinction is made in SNMP OID 's
in between tables and scalars. OID scalar have the extension ".0" and only specify a
value. In SNMP tables the "x" is replaced by an index (1 or greater) to address a value
from the table.
Name OID Type Acc.
Description
esb7213TrapCtrl .66.1.1.1.1.0 Integer32 RW
0 = off 1 = Ver. 1 2 = Ver. 2c 3 = Ver. 3
esb7213TrapIPIndex .66.1.1.1.2.1.1.x Integer32 RO
A unique value, greater than zero, for each receiver slot.
esb7213TrapAddr .66.1.1.1.2.1.2.x OCTETS RW
DNS name or IP address specifying one Trap receiver slot. A port can
optionally be specified: 'name:port' An empty string disables this slot.
esb7213POE .66.1.5.10.0 Integer32 RO
signals POE availability
epc7213NTPTimeValid .66.1.5.15.1.0 INTEGER RO
Show if valid Time is received
epc7213NTPUnixTime .66.1.5.15.2.0 Unsigned32 RO
show received NTP time as unixtime (secs since 1 January 1970)
epc7213NTPLastValidTimestamp .66.1.5.15.3.0 Unsigned32 RO
show seconds since last valid NTP timestamp received
esb7213SensorIndex .66.1.6.1.1.1.x Integer32 RO
None
esb7213TempSensor .66.1.6.1.1.2.x Integer32 RO
actual temperature
esb7213HygroSensor .66.1.6.1.1.3.x Integer32 RO
actual humidity
esb7213InputSensor .66.1.6.1.1.4.x INTEGER RO
logical state of input sensor
esb7213AirPressure .66.1.6.1.1.5.x Integer32 RO
actual air pressure
esb7213Dew Point .66.1.6.1.1.6.x Integer32 RO
dew point for actual temperature and humidity
esb7213Dew PointDiff .66.1.6.1.1.7.x Integer32 RO
difference betw een dew point and actual temperature (Temp -
Dew Point)
esb7213ExtSensorName .66.1.6.1.1.32.x OCTETS RW
A textual string containing name of a external Sensor
Notes
1. Legacy - The command has been replaced by a newer version
2. Command can be entered on any level
3. the output may show 2 lines - the 1st line shows the actual state, the 2nd line the
status after reboot
4. the output may show several lines
5. N/A
6. Please see the
External Sensor Field Table for the right sensor index