GÜDE Expert PDU Energy 8340 Series, Manual

Page: 14 / 82

14
Expert PDU Energy 8340/8341 © 2021 GUDE Systems GmbH
Operating
2 Operating
2.1 Operating the device directly
Power Indicator
If the current is shown on the 7-segment display (see Configuration - sensor ), then
the measured current values of all phases are displayed in sequential order. When no
voltage is measured (smaller 70V) the display will show three dashes, and the green
plain text displays L1 to L4 are off. The red plain text displays L1 to L4 symbolize which
phase is currently viewable in the display.
Select Phase
By repeatedly pressing the "Select" button, the phase that appears on the display, can
be selected manually. After approx 60 seconds the running through all phases re-
sumes.
Display Information
If no phase is selected, repeatedly pressing the "ok" button will show the IP-address
and the values of the external sensors on the display.
Status-LED
The Status LED shows the different states of the device:
· red: The device is not connected to the Ethernet.
· orange: The device is connected to the Ethernet and waits for data from the DHCP
server.
· green: The device is connected to the Ethernet and the TCP/IP settings are alloc-
ated.
·
periodic blinking: The device is in Bootloader mode.
2.2 Control Panel
Access the web interface: http://"IP-address" and log-in.
The web page provides an overview of the energy measurement values of all phases,
as well as the external sensors, provided that they are connected.
The column "Residual Current" is only visible on models that support this feature.
40