4
2
General safety instructions
The operating instructions must be read in their entirety before using the unit for the first time. If there is
any doubt about the connection and operation of the unit, contact the manufacturer (service department).
THE FOLLOWING INSTRUCTIONS
CAREFULLY:
ATTENTION!
The user is responsible towards third parties for the use of the pump (water system, etc.).
Before commissioning, a competent electrician must check that the required electrical safety measures
are in place.
The electrical connection must be made via a socket.
Check voltage. The technical data indicated on the plate must correspond to the voltage of the mains
supply.
The temperature of the liquid to be pumped must not 35 °C. If extension cables are used,
they must be made exclusively of rubber, type H07RNF, in accordance with the DIN 57282 or DIN
57245 standards. Never touch, lift or move the electrically connected pump by the cable. Ensure that
the connection socket is away from water and moisture and that the plug is protected from moisture.
Before putting the appliance into operation, check
that the electric cable and/or the socket are not
damaged.
Remove the plug from the socket before carrying out any work on the unit or pump.
2.1
In case of emergency
Initiate the first aid measures necessary for the injury and request qualified medical assistance as soon as
possible. Safeguard the injured person from further injury and keep them calm.
-
1.
2.
3.
4.