3.Charging
the
flight
battery
3
E3 comes with the built in power supply. You can connect the AC power cord to the AC socket (100-240V AC) directly.
1) Insert the AC power cord into the charger.
2) Insert the AC cord into a wall socket (100-240V). ALL LEDs will
green and flash red to indicate the charger is ready to charge.
3) Connect battery balance wire to balance port which is in front
side of the charge, flter 2 ceconds, the charge detects the voltage
of the battery and starts to charge.
4) The charge starts charging.The LEDs will golw constant red.If
the battery pack is 2-cell, Cell 1 and Cell 2 LEDs will glow
constant red; if the battery pack is 3-cell, Cell 1, Cell 2 and Cell 3
LEDs will glow constant red.
5) When a cell is completely charged, its corresponding LED will
glow constant green. A 2-cell pack is fully charged when LEDs 1
and 2 are constant green. For 3-cell pack, all LEDs will glow
constant green to indicate the pack is fully charged.
6) Unplug the battery from the charge and the charge status LED
will stay green and flash red which indicates the charger is ready
to charge another battery.
Power line
Specifications
:
AC Input:100-240VC,50-60Hz
Battery Type: LiPo
Cell Count: 2-3 cells
Charge Current: 1.2A Max
Cell Terminate Voltage: 4.2V ± 0.02V
Circuit Power: 11W ± 10%
Dimension: 88x57x35mm
Weight:103g
Summary of Contents for Crossfire 280 Series
Page 1: ...280 R ...