background image

Labels

8

90781 (R

ev

. D)-

1

ANSI Z359.1

1–2014

ANSI Z359 recognizes the use of this

harness only within the capacity range of:

130–310 lbs.

Material: 

Polyester & steel

Size:

S

S-L

XL

S-M
M-L
XXL

M
M-XL
XL-XXL

L
L-XL

Part #:

DOM:

Serial #:

90781 (Rev. D)-2

Compliant with:

OSHA 1910, OSHA 1926 Subpart M,

ANSI Z359.11-2014, and ANSI A10.32-2012.

Capacity Range:

 130-420 lbs.

Make only compatible connections.

Prior to use, inspect equipment for rips,
tears, fraying, or any possible structural

deficiency that might compromise the

equipment in a fall. Avoid contact

with sharp and abrasive surfaces.

Cumplir con:

OSHA 1910, OSHA 1926 Subpart M,

ANSI Z359.11-2014, y ANSI A10.32-2012.

Rango de Capacidad:

 130-420 lbs.

Nomás haga compatible conexiones.

Inspeccionar el equipo antes de usar;

que no este desgarrado, deshilachado,

deshebrado o cual es quiere estructural

incapacidad que pueda comprometer el

equipo en una caída. Evitar contacto

con orillas filosas o abrasivo.

Made in USA / Hecho en USA

90781 (Rev. D)-3

!

WARNING

!

ADVENTENCIA

Prior to use, understand all manufacturer

instructions included with equipment
at time of shipment. Improper use of

this equipment could result

in serious injury or death.

IMMEDIATELY remove from service

if subjected to a fall or if

harness fails inspection.

Seguir las instrucciones de fabricación

incluidas con el equipo, al tiempo del

transporte, de la fábrica, antes de usar.

Uso impropio de este equipo puede
resultar en heridas serias o muerte.

INMEDIATAMIENTE quite de servicio

si súbdito a una caída accessorio

o si la falla la inspección.

Guardian Fall Protection

6305 S. 231st St.

Kent, WA 98032

90781 (Rev. D)-4

User must inspect prior to EACH use. Competent

Person must complete formal inspection every

12 months. Competent Person to inspect and initial.

Product lifetime is indefinite as long as equipment

passes pre-use and Competent Person inspections.

20___

20___

20___

20___

20___

INSPECTION GRID

J

F

M

A

M

J
J

A

S

O
N
D

If equipment fails inspection

IMMEDIATELY REMOVE FROM SERVICE

DO NOT REMOVE LABELS

YR

MO

Date of First Use: __________________

90781 (Rev. D)-5

LG

Size Tag

All labels located

on harness strap

beneath label cover 

PARK

LANYARD

HERE – SEE

INSTRUCTIONS

Summary of Contents for Velocity Harness












Reviews: