background image

   

G

ua

rd

ia

Fa

ll 

Pr

ot

ec

tio

  6

30

S.

 2

31

st

 S

t.

, K

en

t,

 W

A

 9

80

32

   

   

 p

ho

ne

: (

80

0)

 4

66

-6

38

 f

ax

: (

80

0)

 6

70

-7

89

   

  w

w

w

.g

ua

rd

ia

nf

al

l.c

om

11

85099 (Rev. C)

Labels

800-466-6385

www.guardianfall.com

6305 S. 231st St.

Kent, WA 98032

Equipment material:

galvanized steel.

Compliant with all OSHA 1910, OSHA 1926 Subpart M,
ANSI Z359.1-2007, and ANSI A10.32-2012 regulations.

Worker capacity: 130-310 lbs. per worker (including all equipment).

Leading Edge SRL MUST be used for all Personal Fall Arrest applications.

Prior to use, read and understand all instructions provided with

equipment at time of shipment from manufacturer.

Avoid contact with hazards including, but not limited to, heat, electricity,

chemicals, and sharp or abrasive edges and surfaces.

Ensure all connections are chosen by a Competent Person and are

compatible with the SkyMast Anchor. Refer to instructions for installation.

Structure must be capable of withstanding minimum load of 5,000 lbs.

!

WARNING

Date of Manufacture:

DO NOT REMOVE LABELS

Made in China

90103 (Rev. B)

SkyMast Anchor

Part #: 00271

MUST be used in combination with compatible Skyhook Anchor.

Attach compatible SRL to each SRL cradle. All pins must be fully secured.

NEVER attach more than 3 workers, 1 per attached SRL.

User must inspect prior to EACH use. Competent

Person must complete formal inspection every

6 months. Competent Person to inspect and initial.

Date of First Use: __________________.

Product lifetime is indefinite as long as

equipment passes pre-use and
Competent Person inspections.

20___

20___

20___

20___

20___

INSPECTION GRID

J

F

M

A

M

J
J

A

S

O
N
D

If equipment fails inspection

IMMEDIATELY REMOVE FROM SERVICE

DO NOT REMOVE LABELS

YR

MO

Summary of Contents for SkyMast 00271













Reviews: