background image

Page 1

Rev. 021820

1-888-651-3431

Lawn Mower Lift

Instructions for Part # HML-05

General Guidelines

•  It is the user’s responsibility to read and follow all instructions.
•  Keep these instructions with the product at all times and review before each use.
•  It is the responsibility of this product’s owner to furnish the instructions to any person that borrows 

or purchases the product.

•  Inspect the product before use to ensure it is assembled properly and all parts are in safe working 

order and free of defects.

•  Never modify this product in any way.
•  All circumstances cannot be addressed in these instructions. Please use common sense and prac-

tice general safety measures when using this product.

•  Parts and/or instructions are subject to change without notice.

Safety

•  Do not exceed the rated weight capacity of 500 lbs.
• 

Always ensure the mower wheels fit properly into the wheel cradles before lifting.

•  Secure the mower with tie down straps (sold separately) before lifting.
•  Always lock the brake pullers before working on the mower.
•  Store the lift in a safe, dry place.

Specifications

Maximum Capacity:

500 lbs.

Lift Range:

0-24 in.

Maximum Tire Width:

10.5 in.

Fit Tire Diameter:

10-17 in.

Inner Wheel Tread:

18.5-26 in.

Outer Wheel Tread:

40-47.6 in.

Summary of Contents for HML-05






Reviews: