Guardian Telecom Inc.
Installation and Operation
WRR/WRT-VoIP Series Telephones
11. Supported Protocols
The WRT-VoIP Telephone with Keypad supports:
●
SIP (Session Initiation Protocol)
●
HTTP Web-based configuration
Provides an intuitive user interface for easy system configuration and verification of WRT-VoIP Telephone with
Keypad operations.
●
DHCP Client
Dynamically assigns IP addresses in addition to the option to use static addressing.
●
TFTP Client
Facilitates hosting for the Autoprovisioning configuration file.
●
RTP
Facilitates autoprovisioning configuration values on boot.
●
Audio Encodings
PCMU (G.711 mu-law)
PCMA (G.711 A-law)
Packet Time 20 ms
12. Supported SIP Servers
As a SIP device, this product will operate with most IP PBX servers.
13. WRR/WRT-VoIP Telephones Setup
13.1. Connections
Figure 5 shows the pin connections on the J9 (terminal block). This terminal block can accept a wire range from 16
AWG to 26 AWG.
Note:
As an alternative to using PoE power 12 to 24 VDC at 500 mA can be supplied to the terminal block.
Figure 5 - Terminal Block Connections
Page 11
