5. Locate the Threaded Rod (D), Large Vinyl
Tips (I), the Large Wing Nuts (E) and the
Large Lock Washers (F). Place the Lock Washer
on the Threaded Rod and start the Wing Nut on
the threads. Turn it so that it is about 5" up the
rod, then slip the Large Vinyl Tip on the rod
behind the nut.
6. Slide the Suction Cup Feet (L) onto each
large vinyl tip.
7. Locate the Small Vinyl Tips (J). Place the Small
Vinyl Tips on the top end of the steel tubing
attached to the barrier. Locate the Extension
Panels (B) or (C), the remaining 8 Plastic Clamp
Plates (G), and the remaining four Bolts & Small
Wing Nuts (H). Based on the size of your vehicle,
determine the appropriate−size extension panels
to use (small or large). Determine which one is
the left and right panel by looking at the border
wire along the side. The border wire should face
the back of the vehicle. Position the Extension
Panels in the optimal place and use the
remaining Clamps, Bolts, and Small Wing Nuts
to secure them in place as in Step 4. Tighten
all wing nuts to keep the barrier securely in
place BEFORE use.
8. Slide the threaded rods into the tubes. Carefully
move the Main Barrier assembly with the rods
inserted to your vehicle. Put it in place, making
sure that the bend at the bottom faces the rear of
the vehicle and the suction cups sit flat on the
cargo area of the vehicle. Turn the Wing Nut on
the threads to adjust the barrier height. Tighten
the Wing Nuts until the barrier is snug.
4. Locate 4 Plastic Clamp Plates (G), 2 small bolts
and 2 small wing nuts (H). Secure these
panels together with the Clamp Plates (G)
as shown. Place the clamps so they securely
grab 2 wires on each panel.
J
5
6
J
LIMITED WARRANTY
This Guardian Gear
®
Grid Vehicle Barrier is warranted against defective
material or workmanship for one year from the date of purchase. Any
Guardian Gear
®
product that is determined to be defective in material
or workmanship during the warranty period will be replaced without
cost
t
o the purchaser for parts or labor. Shipping charges are not
included in warranty returns. Please contact PetEdge Customer Service
at 1-800-638-5754 regarding any defective product. PetEdge will not be
liable under this warranty for any defect, failure or malfunction of this
product caused by normal wear, abuse, misuse, unauthorized adjust-
ments or repairs. PetEdge will not be liable for any incidental or conse-
quential damages of any type. Any implied warranty is limited to the
one-year period provided in this
express warranty. Some states do not
allow limitations on how long an implied warranty lasts or exclusion or
limitation of incidental or consequential damages,
so the above
limitations or exclusions may not apply to you. Warranty is void if product
has been modified in any manner, repaired by anyone other than
PetEdge or has been subject to unreasonable use. Warranty is valid in
the United States.
Date Purchase:____________________________________________
Model # _______________________________
