CUT GASKETS UP TO 6” (152 mm) DIAMETER
(continued)
13.
13.
Loosen top thumb screw. Slide pivot post
to desired ID. Tighten top thumb screw. Repeat
cutting steps.
12.
12.
Punch out bolt holes using hole punch.
11.
11.
For thick or hard to cut materials, make
several shallow passes to complete through cut.
Alternatively, cut halfway through material, turn
over, and complete cut.
www.allpaxcorp.com
(continued on next page)
10.
10.
With slight downward pressure on cutting
block, rotate cutter block clockwise to cut.
Simultaneously press down on gasket material
to prevent rotation.
