Guarda EDGE, Operator'S Manual

Page: 15 / 29

Set up option 1 - With Guarda Electric Exhaust Vacuum
What is required?
Set up procedure
A) Guarda Edge Power Cutter C) Pressured Water Supply E) 38mm/1.5” Guarda Slurry Hose*
B) Guarda Electric Exhaust Vacuum D) Power Outlet 220V/10A F) 50mm/2” Guarda Exhaust Hose**
1
3
6
2
4
A
B
C
F
E
D
5
The end of the exhaust hose must be
placed outside in a well ventilated area
1) Connect Kevlar
connecting hose to the
Guarda Electric Exhaust
Vacuum exhaust port. It
has a bayonet type fitting
that locks in a clockwise
rotation.
2) Connect the 50mm/2”
exhaust hose to the Kevlar
connecting hose to
exhaust the Edge engine
fumes outside in a well
ventilated place.You can
extend the 50mm/2”
Guarda Exhaust hose to a
maximum of 60m/200feet.
3) Connect 38mm/1.5”
slurry hose to the Guarda
Electric Exhaust Vacuum
inlet. (hose length not to
exceed 5m/15 ft between
Guarda Electric Exhaust
Vacuum & Edge
Powercutter.
4) Connect 38mm/1.5”
slurry hose to Edge
Powercutter.
5) Connect water hose to
Edge Powercutter
6) Connect water hose to
pressured water supply
7) Connect Guarda
Electric Exhaust Vacuum
power lead to power
point.
1)
2)
3)
5)
6)
7)
4)
*(Max. length 5m/15ft) **(Max. length 60m/200ft) (Comes with Kevlar connecting hose)
page 15