30
Chain drive
Assembly and operating instructions
ELTRAL KS 30/40 Solo
15 Warranty and customer service
Our „General Terms of Business“ apply in principle.
The warranty complies with legal regulations and is valid in the country where the motor was
purchased.
The warranty covers material and manufacturing defects occurring under normal stress.
Warranty and liability claims in view of personal injury and damage to property are excluded, if
the latter have occurred as a result of.
•
Inappropriate use of the motor.
•
Improper installation, commissioning, operation, maintenance and repair of the motor.
•
Operation of the motor with faulty, incorrectly fitted or non-functional safety and protection
devices.
•
Failure to observe the instructions in the Installation and Operating Guide.
•
Unauthorised structural modification of the motor.
•
Catastrophic events due to penetration of foreign bodies and force majeure.
•
Wear.
For possible warranty claims or the delivery of spare parts or accessories, please contact your
responsible distribution company.
16 Connection diagram
Connection of KS 30/40 - 110/230 V and 24 V
The connecting cable of the drive is approx 2 m long. If the distance between drive and
wall switch is longer, the cable must be extended (see section „9 Installation (electrical)“ on
page 25).
The connection is to be carried out according to the following wiring diagram.
1
2
3
N
110/230 V~
F
1
2
3
110/230 V~ 50/60 Hz
Cable Colour
Function
Light blue
Black
Brown
Drive
If, after connection, the running direction
is contrary to that of the arrows on the wall
switch, the wires 2 and 3 must be inverted
