18
Chain drive
Assembly and operating instructions
ELTRAL KS 30/40 EASY
3 Intended use
The chain drive ELTRAL KS 30/40 EASY is designed to open and close tilt, top hung, side
hung, horizontal and vertical pivot windows, rooflights and small domes exclusively.
Other use is considered unintended use.
Gretsch-Unitas GmbH Baubeschläge do not take liability for damage arising from non-compliant
use.
In the case of non-compliant use, the guarantee is extinguished.
All deliveries are made on the basis of our General Terms and Conditions
4 Description of ELTRAL KS 30/40 EASY
The chain drive ELTRAL KS 30/40 EASY is designed for use in dry rooms at an ambient tem-
perature from -5°C to max. +65°C.
It can be installed either horizontally or vertically.
One ELTRAL KS 30/40 EASY set consits of:
•
Chain drive with connecting cable, length 2 m
•
Standard pivot bracket
•
Pivot bracket for top hung sash with drive mounted to the frame
•
Chain holder for tilt sash, chain holder for top hung sash
•
Package with locking piece and connecting pin
•
Drilling template
•
Assembly and operating instructions
The following installation variants are possible:
•
mounted on the frame
•
mounted on the sash.
Note!
º
Type label
The type label is attached to the motor.
With the motor installed, the type label is not visible.
