14
4. OSD Menu
※Press “MENU” button on Key board
Option
•
Handle BUTTON : Setting for Steering wheel button (switching mode) – On or Off
•
UI DVB-T(DMB) : Setting for UI DVB-T(DMB) ICON – On or Off
•
UI DVD : Setting for UI DVD ICON – On or Off
•
TCH_Opt : Setup for Touch Calibration (
Only for Panasonic system
)
※ You must select 'OSD → Utility → calibration → Execute'
in the collation before setting the touch in the option
OFF - NOT USE
0.5 – After finishing touch calibration, It is needed to select this
option so that the stored touch value can be used.
1.5 – Before doing touch calibration through navigation, It is neede
d to select this option
•
NAVI COM : Output the touch data through UART
※ 1) Necessary to get Uart protocol from Navi manufacturer
2) Impossible to calibrate in Qroi
Setting: OSD → Config → NAVI-RGB → GI5000_WVGA (Select one of
Navigation Model) → Option→ QROI (Select one of Navigation
manufacturer)
•
Reset : initialization
Settings
GU Electronic
