Issue 07/2011
Page 34
Bu
ilt
-in g
en
er
at
or
s w
ith s
w
itch c
ab
in
et f
or p
er
m
an
en
tly i
ns
ta
lle
d p
ow
er g
en
er
at
io
n s
ys
te
m
s ≥ 1
2 k
VA i
n fi
re e
ng
in
es
Installation of generator
Installation of generators of model 132
3.5.3
Assembly instructions, coupling via drive shaft
Danger
Risk of injury
y
The rotating couplers of drive shafts are hazard areas.
►
Put suitable protective measures in place.
►
Never reach into the couplers of rotating drive shafts.
►
Switch off the drive unit before performing any inspection
or maintenance work on the drive shafts.
►
Prevent the drive unit from being switched back on by
accident (e.g. remove the ignition key and keep somewhere
safe).
Important
►
Do not use any sliding grease pastes, oils or greases with
molybdenum disulphide or other high-pressure additives.
General function of drive shaft
Drive shafts are flexible couplers used to bridge larger distances between
shaft ends. In principal, they consist of two metal bellows couplings and
an intermediate tube. The metal bellows balance any lateral, axial and
angular shaft offsets. The connecting flanges for the intermediate pipe are
gimbal-mounted in the metal bellow coupling.
Summary of Contents for DWG (BL) 13/7-2 ZE
Page 87: ...Page 87 Issue 07 2011...
