GTR TACHO Instruction Manual Download Page 2

GTR DEVELOPMENTS  

 WWW.GTRDEVELOPMENTS.COM

DESCRIPTION

The GTR Tacho is a self-contained electronic engine monitoring system 

that displays RPM, coolant temp, oil pressure, battery voltage and also 

with the option of up to 2 x exhaust pyrometers. The compact 3-1/8” 

x 3-1/8” size is very easy to mount. The GTR Tacho’s extremely rugged 

construction allows it to perform well in almost any racing environment.
The GTR Tacho recalls and displays the highest overall RPM and 

gives total engine RPM, coolant temp, oil pressure and exhaust temp  

(if exhaust temperature option is used) from the race start to finish in a 

simple graph form. The Tacho works on 4, 6 & 8 cylinder engines with 

either magnetos or distributors and is powered by a common 9 volt 

battery or can be hard wired in to and 6-12 volt supplies with simple 

wiring and sensor installation.

INSTALLATION

The kit comes with mounting wings that attach to the Tacho housing 

with 4 x M4 x .7mm button screw and can be fixed to the vehicle with 

2 x dzues fastners. The unit should be securely mounted in the cockpit  

in a good viewing position and clear from interfering with any of the 

vehicle controls.

Wiring Instructions:

Brown 

g

  Oil Power

Blue 

Water Temp

White 

Aux 0

Green  

g

   Pryo 0 Neg

Pink 

Pryo 0 Pos

Yellow  

g

    Tacho

Black  

g

    Batt Neg/Earth

Grey  

g

    Oil Pressure

Red  

g

  Batt Pos (8-16V)

Violet  

g

   Aux 1

Orange 

g

   Pryo 1 Pos

Light Green 

g

   Pryo 1 Neg

Tach Oil Pressure

Brown 

g

 White

Grey 

g

 Red

Black 

g

 Black 

Summary of Contents for TACHO









Reviews: