OPERATION
Turning on:
- Push joystick located on face of bleed
unit to the left this will bring the GTR logo
on screen (figure 3) for approximately 3
seconds then display the main screen.
Main menu:
- Press right this will take you to Main menu.
GTR DEVELOPMENTS
Stats:
- Scroll down to STATS (figure 7), press
right, this feature will show the time the
bleed unit has bled air from the tyre, and
the maximum pressure the bleeder has
recorded during the race (figure 8).
- This feature requires resetting between
every race if used.
- Press up in this feature to reset.
Figure 3.
Figure 7.
Figure 8.
Figure 4.
Setting desired Tyre pressure:
- Scroll down to PRESSURE (figure 4),
press to the right, this will allow setting
of pressure by pushing up or down to
the desired setting. Then by pressing
right this will set the desired setting
(figure 5) and take you back to the
operation display.
Setting desired delay:
This feature is used to prevent the bleeder
venting during spikes in tyre pressures due
to rough track conditions. The delay will
only allow the bleeder to operate when
the pressure has reached the set pressure
for the set delay time before venting.
- Scroll down to DELAY (figure 6), press to
the right, this will allow setting of time
delay by pushing up or down to desired
setting. Then by pressing right this will
set the desired setting, and take you
back to the operation display.
Figure 5.
Figure 6.
