www.gtm
-
gmbh.com
Series KTN
-
ZD (eng.) 16/09/2022
Page 7
#
PrecisionWins
Transducer condition and modifications
You may only operate the transducer in a perfect condition while complying
with the instructions given in the operating manual.
The transducer must not be modified either in its design or safety
-
related fea-
tures, without our express, written permission.
Personnel qualifications
The transducer and additional components must only be operated and as-
sembled by qualified personnel. Qualified personnel are those persons who
are acquainted with the assembly, commissioning and operation of the trans-
ducer and who have the appropriate qualifications for their job.
Safety instructions
DANGER OF BURSTING!
Do not overload the transducer!
The attached parts must also be designed to bear the maximum load.
Only use attached parts in an appropriate condition.
In case of new, untested designs, you must provide additional protec-
tive measures against bursting parts.
Overloading
All transducers of this series have already been subjected to an overload test
at the manufacturer's. No additional overloads are permissible; always com-
ply with the nominal loads of the transducer.
NOTE
GTM offers training courses to qualify personnel.
