36
Maintenance
Locate the rear brake arms and brake cable at
the top of the forks.
The cable should automatically pull itself into the
right position, with the metal end slotting into the
hole in the cable holder. If you are having trouble
doing this see page 39 to adjust the brake cable.
Push the black rubber cable cover across,
so that it is flush against the cable holder.
Pull the brake cable across and hook the thinner
part of the cable through the gap in the cable
holder. You may need to pull back the black
rubber cable cover to do this.
Assembling the brakes
These instructions apply to both your front and rear brakes. You should adjust your brakes regularly,
as well as after any maintenance that involves removing and re-attaching your brakes.
Brakes
