13
Troubleshooting
AirRam is not cleaning well
1. Empty the bin
2. Check bin is correctly fitted
3. Check filter is correctly fitted
4. Clean and/or replace filter
5. Check brush bar fitment
AirRam has stopped or won’t work
1. Charge battery
2. Clear debris from brush bar
Battery will not charge
1. Check connections
2. Check wall socket
If this doesn’t solve your problem don’t worry, we will help.
Go to
www.gtech.co.uk/support
or call
01905 345 891
If the brush bar jams during use, the
AirRam K9 will stop and the LEDs will
appear red. You will need to remove and
clean the brush bar (see page 10).
The AirRam K9 will not re-start until the red
lights go out. This will take ten seconds.
If the problem persists, follow the
troubleshooting instructions below.
Clearing a jam / fault
10
seconds