Gtech AirRam AR29 Operating Manual Download Page 22 | Manualshive

Page: 22 / 24

Gtech AirRam AR29 Operating Manual Download Page 22

22

Visit www.gtech.co.uk/warrantyregistration to register your product to ensure that we
have all the information required to provide you with quick and efficient support.

You will need both your product’s serial codes.

If you purchased directly from Gtech your details are already registered and your 2 year
warranty will start automatically.

If you purchased from an authorised Gtech retailer, please register your warranty within 3 months
and you will need to provide proof of purchase to support any claim against your warranty.

WHAT ISN’T COVERED

SUMMARY

• The guarantee becomes effective at the date of

purchase (or the date of delivery if this is later).

• You must provide proof of delivery/purchase

before any work can be carried out on the
vacuum cleaner. Without this proof, any work
carried out will be chargeable. Please keep your
receipt or delivery note.

• All work will be carried out by Gtech or its

authorised agents.

• Any parts which are replaced will become the

property of Gtech.

• The repair or replacement of your vacuum cleaner

is under guarantee and will not extend the period
of guarantee.

Gtech does not guarantee the repair or
replacement of a product as a result of:

• Normal wear and tear (e.g. filters & brush bar)
• Accidental damage, faults caused by negligent use

or care, misuse, neglect, careless operation
or handling of the vacuum cleaner which is not
in accordance with Gtech operating manual.

• Blockages - please refer to the Gtech operating

manual for details of how to unblock your vacuum
cleaner.

• Use of the vacuum cleaner for anything other than

the normal domestic household purposes.

• Use of parts and accessories which are not Gtech

genuine components.

• Repairs or alterations carried out by parties other

than Gtech or its authorised agents.

• If you are in doubt as to what is covered by your

guarantee, please call the Gtech Customer Care
Helpline on 01905 345 891.

X-XX-XXX~
XXXXX~
WWYY~
00~0000000

WARRANTY – REGISTRATION

WARRANTY – TERMS AND CONDITIONS

Your Gtech Multi and AirRam are guaranteed against material or manufacturing faults for 2
years from the date of purchase, subject to the following terms and conditions:

2859_System_TE_manual_update_aw.indd 22

31/05/2018 13:24

«
...
20
21
22
23
24
»

Summary of Contents for AirRam AR29

























Reviews:

No comments