13
Troubleshooting
AirRam is not cleaning well
1. Empty the bin
2. Check bin is correctly fitted
3. Check filter is correctly fitted
4. Clean and/or replace filter
5. Check brush bar fitment
AirRam has stopped or won’t work
1. Charge battery
2. Clear debris from brush bar
Battery will not charge
1. Check connections
2. Check wall socket
If this doesn’t solve your problem don’t worry, we will help.
Go to
www.gtech.co.uk/support
or call
01905 345 891
If the brush bar jams during use, the
AirRam will stop and the LEDs will appear
red. You will need to remove and clean the
brush bar (see page 11).
The AirRam will not re-start until the red
lights go out. This will take ten seconds.
If the problem persists, follow the
troubleshooting instructions below.
10
seconds
Clearing a jam / fault
