MM II 7
Chapter 2: Assembly and Installation
The MM II package should include the following:
Tablet
Stylus or cursor
Interface cable
Power supply (optional)
Document clips
MM II+ Graphics Tablet User’s Guide
To assemble and install MM II:
1.
Connect the stylus/cursor to the tablet.
2.
Attach the tablet to the host and power source.
3.
Turn on the tablet.
4.
Attach the document clips. (Optional)
NOTE:
Always have the computer and tablet power off when attaching or detaching any
part of the MM II. If the power is on, nothing serious happens to the MM II, but it could
have the potential to corrupt the file being worked on or cause the computer to
malfunction.
Installing MM II Graphics Tablet
1.
Plug the stylus/cursor into the modular socket on the right-hand edge of the
tablet.
The cursor and stylus are interchangeable.
Summary of Contents for MM II 1201
