Page 6
01607
RPM
-10
10
20
kv
-4
-2
0
2
ms
0
Chart
Comparison
Digital
Waveform
Fig. 5 - Display mode selection menu
Chart (i.e. trend line) view.
Comparison view.
Analog gauge and digital readouts
Waveform (i.e. oscilloscope) view.
4.5 ‘HOLD” button
·
When chart, digital or waveform display mode is selected, pressing the ‘HOLD’
button will pause the measurement, hold the current display, and the word
“HOLD” will be shown in the measurement area of the display to indicate this
status. Press the ‘HOLD’ button again to resume normal operation .
·
When in the comparison display mode, this button is used to initiate and stop a
measurement. For details see ‘6.2 Comparison view’.
4.6 Tachometer reading
Digital readout of the engine RPM.
4.7 Battery level indicator
The battery level indicator provides an approximate indication of the state of charge of
the internal battery, as follows:
Full
Empty
NOTE
: The instrument will turn automatically off if the battery voltage falls below the
absolute minimum.
