GTC Sound Innovations REVPAD Page 21 User Manual Download

Page: 21 / 85

Setting up the REVPAD Base Unit

The REVPAD Base Unit provides high-end effects, analog distortion and an overdrive circuit. While designed with foot switches, the
REVPAD system displays its greatest power and flexibility through wireless communication with the Touchpad.

To set up the base unit:

SYS

X-Y

BYP

ASS

SET

CLIP

COMM

FREEZE

PEDAL

TCH

NORMAL

Connect the included 9 VDC transformer to the POWER inlet on the base
unit back panel.

Run a 1/4" guitar cable from your electric guitar to the INPUT connector.

Run a 1/4" guitar cable from the OUTPUT LEFT connector on the
REVPAD Base Unit to your amplifier.

Note:

The REVPAD system accomodates a wide range of output options.

See

Connecting Your REVPAD to the Outside World

on page 17

for more

information.

Connect the antenna to the ANT. connector of the base unit.

Quick Start

Summary of Contents for REVPAD






















































































Search results

Summary of Contents for REVPAD

Reviews:

Related manuals for REVPAD

Brands by name

Popular brands

GTC Sound Innovations REVPAD, User Manual

Search results

Summary of Contents for REVPAD

Reviews:

Related manuals for REVPAD

Brands by name

Popular brands