Installation & User Manual - Oncam C-12 Series
©
Oncam Global Group AG, 2021. All rights reserved.
39
Figure 72 Gland Alignment
Ensure the tabs of the gland are aligned as shown.
Figure 73 Rear Enclosure
Using appropriate fixings for the surface mount,
the rear enclosure to the wall.
The camera has been designed to be mounted
with #8 or 4mm countersunk screws, however the
length and fixing support material (plugs etc.)
need to be specified by the installer on a case by
case basis.
Figure 74 Plugging RJ45 Connector to RJ45
Socket
If a cable terminated with a RJ45 connector is
used, then plug it into to RJ45 socket.