manualshive.com logo in svg

GST Onvif Oncam C-12 OUTDOOR PLUS, Installation And User Manual

The GST Onvif Oncam C-12 OUTDOOR PLUS is a high-performance outdoor surveillance camera that ensures enhanced security. To get started with this cutting-edge product, you can easily obtain its comprehensive Installation And User Manual. Download it for free from our website, providing step-by-step guidance for hassle-free setup and optimal usage.

Share
Download
background image

 

 

 Installation & User Manual – Oncam C-12 Series 

 

 

 

 

 

© 

Oncam Global Group AG, 2021. All rights reserved. 

174 

 

Figure 247 Motion Analytics Create New 

5.6.1.2.1  Name 

When creating a rule, you must choose a unique name for the rule and the associated events 

and metadata created. 

5.6.1.2.2  Analytic Type 

Select the specific analytic you need. This list is dependent on the license you have for your 

camera so you may need to request a license key to access specific analytics. Depending on 

the analytic you choose their may be further options to configure which you will see below. 

 

The standard analytic types are: 

1)  Region Motion Detector 

2)  Motion Data Only 

3)  Whole Scene Motion Detector 

4)  Tampering 

 

Depending on your chosen NVR/VMS and the vendor of the solution, you may have the option 

of adding an analytics license to the camera. 

Depending on your analytics license the following additional Analytics Types are available: 

 

•

 

Loitering Object Detector 

•

 

Line Counting 

•

 

Region Object Detector 

•

 

Object Tracking Only 

•

 

Region Object Occupancy 

5.6.1.2.3  Region Motion Detector 

For this analytic, only motion which is centered inside the region will create an event. Motion 

Alarm is also triggered by this analytic. 

 

Draw and save a region then arm the regions to create associated events and metadata. 

 

Multiple Rules of this type can be created. 

 

This rule creates the following events and metadata: 

 

tns1:RuleEngine/MotionRegionDetector/Motion 

Summary of Contents for Onvif Oncam C-12 OUTDOOR PLUS
































































































































































































































Reviews:

No comments

Related manuals for Onvif Oncam C-12 OUTDOOR PLUS

Major tech MT400 Instruction Manual preview
MT400
Brand: Major tech Pages: 4
Garrecht Avionik TRX-2000 User Manual preview
TRX-2000
Brand: Garrecht Avionik Pages: 43
Vaisala MD30 Updating Software preview
MD30
Brand: Vaisala Pages: 7
Digital Watchdog DWC-MV421TIRB Quick Start Manual preview
DWC-MV421TIRB
Brand: Digital Watchdog Pages: 2
Arecont Vision AV5100M Specifications preview
AV5100M
Brand: Arecont Vision Pages: 3
Novus NVIP-2VE-4231/PIR Quick Start Manual preview
NVIP-2VE-4231/PIR
Brand: Novus Pages: 36
Digital Watchdog MEGApix DWC-MV82WiA Quick Start Manual preview
MEGApix DWC-MV82WiA
Brand: Digital Watchdog Pages: 2
LLOYTRON MIP SYSTEM 3 B7835 Operating Instructions Manual preview
MIP SYSTEM 3 B7835
Brand: LLOYTRON Pages: 12
Olympus IM017 Instructions Manual preview
IM017
Brand: Olympus Pages: 202
Easi-Dec Roof-Walk Assembly Instructions preview
Roof-Walk
Brand: Easi-Dec Pages: 4
Linksys WVC54GC - Wireless-G Compact Internet Video Camera Network User Manual preview
WVC54GC - Wireless-G Compact Internet Video Camera Network
Brand: Linksys Pages: 92
Ganz Lite VRDDN-2812Y60 Specifications preview
Lite VRDDN-2812Y60
Brand: Ganz Pages: 2
CNB XNET IDC4000T User Manual preview
XNET IDC4000T
Brand: CNB Pages: 30
Netatmo presence Microsd Card Manual preview
presence
Brand: Netatmo Pages: 9
EISST H500-BK User Manual preview
H500-BK
Brand: EISST Pages: 15
Ronix RWS-XE5DIP3610M-IR Operating Instruction preview
RWS-XE5DIP3610M-IR
Brand: Ronix Pages: 28
ratiotec Soldi Smart Pro USD Instruction Manual preview
Soldi Smart Pro USD
Brand: ratiotec Pages: 44
Buckingham 101SR Instructions & Warnings preview
101SR
Brand: Buckingham Pages: 6

Brands by name

Popular brands

Load more brands