GST-RP16 Conventional Repeater Panel
Installation and Operation Manual
Page 2
2. Front panel is shown in Fig. 2.
Fig. 2
Instructions of Key and Indicators:
Power ON
This green LED is constantly lit after the power is on.
FIRE
General fire alarm light.
a red LED, lit when there is a fire signal.
ZONE1~ZONE16
Zone fire lights, red LEDs, lit if there are fire alarms in
corresponding zones. The flashing of an LED indicates it is the latest fire alarm.
FAULT
Fault light, yellow, lit when there is a fault signal.
MUTE
Pressing this key in alarm or fault state can silence the alarm sound, while
it gives another sound to indicate the mute state.
3. Operation Principle
GST-RP16 is a zonal fire display panel developed with microprocessor. It indicates
the alarm zone with LED and audio-visual signal. It connects with conventional
FACP with multi-wire, providing alarm signal after processing the data from
conventional FACP.
V Mounting and Commission
1. Mounting
GST-RP16 is wall-mounted. Drill two 5 holes on the wall as shown in Fig. 3, push
two 5 plastic expansion sleeves into the holes, then fix the back of GST-RP16
with expansion bolts and connect wires.
Fig. 3
ZONE12
MUTE
ZONE14
ZONE16
ZONE 2
ZONE 4
ZONE 6
ZONE 8
ZONE10
PowerON
ZONE11
ZONE 1
ZONE 3
ZONE 5
ZONE 7
ZONE 9
FAULT
FIRE
ZONE13
ZONE15
