6
Fig. 4
4. Wiring
0.5mm
2
or above Fire-resistant copper core
cable for V+ and V-.
1.0mm
2
or above Fire-resistant copper core
cable for K1 and K2.
V Application
1. Applying power supply to the detector
after wiring and checking, the green LED
flashes 3~6 minutes for warm-up, and then it
will light constantly for normal monitoring.
2. Alarming: When the monitored gas
density is over its preset value, the detector
gives quick intermittent "Tick" sound with red
LED quick flashing and K1 and K2 are closed.
Bracket
H o o k
G ro o v e
E-MAIL: [email protected]
