30306067 Issue 1.02
When mounting intelligent detector on the
sounder, first wire according to Fig. 3, then refer
to Fig.4.
Intelligent
Detector
3
1
1
Fir
e Al
arm C
on
tr
ol
P
ane
l
Intelligent
Detector
Z1
Z2
L+
I-9308
L-
D2
D1
2
4
6
5
3
2
4
6
5
24VDC
Fig. 4
"1" and "3" of the sounder connect to loop,
polarity-insensitive.
"2" and "4" don't connect to any wire, but are used to
fix the detector accessorily.
When mounting conventional detectors on
the sounder, I-9319 Intelligent Zone Monitor Unit
should be added to the system and a P-9907
Active End of Line Unit connected to the end of
the loop. First wire according to Fig. 3, then refer
to Fig. 5.
Conventional
Detector
3
1
1
Fire
Alarm Cont
rol Pa
nel
Conventional
Detector
Z1
Z2
L+
I-9308
L-
D2
D1
24VDC
2
4
6
5
3
2
4
6
5
I-9319
Z1
O-
Z2
O+
3
D
iode
D
iode
P-9907
Active End of Line Unit
Fig. 5
"1" of the sounder connects to "O+" of the zone
monitor unit.
"3" of the sounder connects to "O-" of the zone monitor
unit.
An 1N5819 diode (please note polarity) should be
connected between 1 and 2 of the sounder.
"2" of the sounder connects to "1" of the next
equipment as anode of output power.
"2" and "3" of the last sounder connect to end of line
unit.
"4" of the sounder doesn't connect to any wire, but is
used to fix the detector accessorily
Specification
Operating Voltage
24VDC
Alarm Current
≤
15mA
Sound Level
≥
85dB
(1m
horizontally
ahead (A weighted))
Type of Alarm Signal
Pre-alarm: Intermittent
(0.5s on 1s off)
Fire
Alarm:
Continuous
(0.4s on 0.3s off)
Ingress
Protection
Rating
IP31
Operating
Temperature
-
10
℃～+
50
℃
Relative Humidity
≤
95%, non condensing
Material and Color of
Enclosure
ABS, white (RAL 9016)
Dimension
Diameter: 120mm
Height: 38.8mm(without top
cover)
Weight
About 130g
Accessories and Tools
Model
Name
Remark
I-9308
Addressable
Sounder Circuit
Module
Order separately
Top cover
Order separately
Limited Warranty
GST
warrants that the product will be free of charge
for repairing or replacing from defects in design,
materials and workmanship during the warranty period.
This warranty shall not apply to any product that is
found to have been improperly installed or used in any
way not in accordance with the instructions supplied
with the product. Anybody, including the agents,
distributors or employees, is not in the position to
amend the contents of this warranty. Please contact
your local distributor for products not covered by this
warranty.
This Data Sheet is subject to change without notice. Please contact GST for more information or questions.
Gulf Security Technology Co., Ltd.
No. 80, Changjiang East Road, QETDZ, Qinhuangdao, Hebei, P. R. China 066004
Tel: +86 (0) 335 8502434 Fax: +86 (0) 335 8502532
www.gst.com.cn
All manuals and user guides at all-guides.com
