Geophysical Survey Systems, Inc.
LineTrac™ Assembly Instructions
MN 36-266 Rev B
Copyright © 2016-2017 Geophysical Survey Systems, Inc.
All Rights Reserved
Attach Accessory Cable
3
Grab the grey accessory cable from the top of the LineTrac and plug it into the accessory port of the HS or DF
antenna. This port is located under the control cable port.
Note:
You must line the red dot up with the red line at the rim to attach the cable.
The cable will not go in
otherwise.
4
When ready to remove the cable and accessory, pinch the silver end at the base and pull upwards.
Do not unscrew any part of the LineTrac cable
. Unscrewing the black housing at the attachment point
may damage the LineTrac accessory.
Pinch
here
Pull
up
