- 2 -
SUCP Programmer
1
I
mpor tant
InformatIon
on
the
safety
and
assembly
• Assembly, installation and servicing must be carried out by an authorised electri-
cian.
• Check the system for short circuits in the coaxial cables before starting up.
• Beware of short circuits!
• No liability is accepted for any damage caused by faulty connections or inappropri-
ate handling.
• Observe the relevant standards, regulations and guidelines on the installation and opera-
tion of antenna systems.
• The standards IEC/EN/DIN EN 61319-1, IEC/EN/DIN EN 60065 and IEC/EN/
DIN EN 60728 must be observed.
• Do not perform installation and service work during thunderstorms.
• The supplied AC/DC power adapter resp. USB cable must be used to power this
product. If the power cord becomes damaged, it must be replaced. Always refer
to qualified personnel. When disconnecting the product don’t pull the cable but the
plug to prevent damage of the cable (wobbly plugs and outlets result in fire risk). The
product shall be serviced by qualified experts only.
• For a complete disconnection from the mains, the AC/DC power adapter must be
pulled out of the mains socket. Ensure that the AC/DC power adapter can be pulled
out without difficulties.
• This product is for indoor use in moderate climates only.
• In case of the formation of condensation wait until the device is completely dried.
• Never expose the device to liquids or splashing water. Do not place any vessels
containing liquids on the device.
• Do not place anything on the device which could initiate fires (e.g. candles).
• This product contains no user serviceable parts. The unit should only be opened or
repaired by qualified service personnel.
Electronic devices should never be disposed of in the household rubbish. In accordance
with directive 2002/96/EC of the European Parliament and the European Council from
January 27, 2003 which addresses old electronic and electrical devices, such devices
must be disposed of at a designated collection facility. At the end of its service life,
please take your device to one of these public collection facilities for proper disposal.
2
t
echnIcal
descrIptIon
G
ener al
With the SUP programmer, you can change the programming of a suitable
Unicable II device. The required PC software is only available for Windows
®
operating systems.
The SUCP Programmer is powered by an external power supply or via the USB
port.
