- 16 -
- 16 -
5.3.1 Programming channel strips “A” and “D”
• Press
the
M
button:
—>
The “Setting the input channel” – “
INPUT
” menu is
activated.
Setting the input channel
Note:
– If “
– –
” appears in the second line of the display, there is no
input signal present. Check the configuration of the antenna
system and head-end station.
– If the received signal is all right, “
OK
” is displayed.
• Set the desired input channel by pressing the
but-
tons repeatedly or permanently.
Notes:
– Beside the input channel set the corresponding fre-
quency is displayed.
– The quality of the data stream received is indicated
by two status LEDs:
LED indicator
Signal
Green
OK
Red
No signal
Bx 1A
C06 (184.5)
INPUT
OK
M
/
Bx 1A
C06 (184.5)
INPUT
OK
M
/
