- 19 -
STC 1200
C
onneCtinG
sat if
inputs
The following description refers to one of the SAT IF input distributors. The
other SAT IF input distributors are connected in the same manner.
• Connect outputs
E
and
F
of the input distributor (fig. 14) on the front of
the head-end station (fig. 2
4
) to the corresponding inputs on the cassettes.
Using two reception levels (factory settings)
• Connect inputs
B
and
D
of the SAT IF input distributor (fig. 14) to the
LNBs.
—> For this use cable terminals mounted in the openings
$
(fig. 15).
•
Terminate loop-through output
C
(fig. 14) using the terminating resistor
supplied.
Using one reception level (loop-through operation)
• Connect input
D
of the SAT IF input distributor (fig. 14) to the LNB.
—> For this use a cable terminal mounted in one of the openings
$
(fig. 15).
• Connect loop-through output
C
to input
B
using a HF cable made on-site.
7.3 C
onneCtinG
hf
output
of
the
head
-
end
station
$
$
$
!
Fig. 15
• Connect the HF output of the hybrid amplifier
!
to the cable system.
