- 24 -
PTIS 1000
a
lloCating
the
iP
addresses
In this menu up to 16 services that are contained in the data streams of the in-
put source signals ("
Tuner A
", "
Tuner B
", "
ASI
") can be accessed. The services
detected receive an IP address automatically.
In the following sub-menus you can set specific parameters for each service.
Bx 4
Das Erste
IP-OUT 1
=>
• Press the
buttons to select the IP outputs to be set ("
IP-OUT 1
" … "
IP-
OUT 16
").
—> In the second line of the display the service is indicated allocated to
the IP output (e.g. "
Das Erste
").
—> If no service is found or allocated the display shows "
– – –
" instead
of the name of the service.
• Press the button.
—> The "Switching the IP address off or on", "Selecting the transmission
protocol", "Setting the port number" – "
MODE / PORT
" menu is acti-
vated.
s
witChing
the
iP
address
off
or
on
s
eleCting
the
tr ansmission
ProtoCol
s
et ting
the
Port
number
In this menu you can switch off the IP address displayed, and define the trans-
mission protocol and the port number.
Bx 4A
on UDP
MODE/PORT
1234