- 19 -
PTDT 9200
s
witChing
the
modul ator
off
or
on
Bx 4A
C68
OUTPUT
on
• To switch off the modulator place the cursor under "
on
" using the button
and switch "
off
" the modulator of the channel strip using the
buttons.
—> The status LED is switched off (see also page 11).
—> The switched off modulator is indicated by "
- - -
" in the display
instead of the channel or frequency display.
• In the case the modulator is switched "
off
" use the
to switch it "
on
".
• Press the
button.
—> The "Adjusting the output levels of the channel strips" – "
LEVEL
" menu
is activated.
a
djusting
the
outPut
levels
of
the
Channel
striPs
This menu item is used to set the output levels of the modulators of the
channel
strips "A" and "B" to the same value
.
Bx 4A
-3 dB
LEVEL
• Measure and note down the output level of the channel strip. To adjust the
output level to the output levels of the other cassettes please pay attention to
chapter 6 "Final procedures".
• By repeatedly pressing the
button scroll back to the "Selecting the
channel strip" menu.
• Select the other channel strip
(page 17) and set the following menu items:
• Select "Channel / frequency setting" (page 18).
• Set the "Output channel" or "Output frequency" (
• Switch on the modulator if necessary (
• Measure and note down the output level.
• Activate the
"
LEVEL
" menu of the channel strip with the higher output level.
• By pressi
ng
adjust the higher output level of the one channel strip
