manualshive.com logo in svg

GSS PTDT 9200, Assebly Instructions

Share
Download
GSS PTDT 9200 Assebly Instructions Download Page 3

 

 

- 3 - 

PTDT 9200

 

Output signal  ......................................................................................27

  Bandwidth of the output signal ...................................................... 27
  Carrier modulation ...................................................................... 27
  Inverting the user signal ............................................................... 27

 

Transmission parameters ................................................................... 28

  Transmission mode ...................................................................... 28
  Code rate .................................................................................. 28
  Guard interval ............................................................................ 28

 

Transmitter identification .................................................................... 29

 

Stuffing ........................................................................................... 30

 

Substitute signal in the case of an incorrect input signal ........................ 31

 

Transport stream ID and the ORGNET-ID ............................................. 31

 

Network Information Table (NIT) ......................................................... 32

 

Deleting a PID .................................................................................. 33

 

Renaming a PID ............................................................................... 33

 

Factory reset .................................................................................... 34

 

Saving settings ................................................................................. 34

6  Final procedures ..............................................................................................35
7  Channel and frequency tables ..........................................................................36

Summary of Contents for PTDT 9200







































Reviews:

No comments

Brands by name

Popular brands

Load more brands