- 8 -
PTDQ 1000 ASI LAN / PTDQ 1001
2.4.2.3 Menu setting “2 => ASI ASI => MB”
Transport stream 1 is made available via modulator “
A
»]ÊÌÀ>ëÀÌÊÃÌÀi>ÊÓÊÛ>Ê
the ASI output and the transport stream from the ASI input “TS
ASI
” via modula-
tor “
B
” (MB).
2.4.3 General
The cassette is equipped with two channel strips (“
A
” and “
B
”). The channel
ÃÌÀ«ÃÊVÃÃÌÊvÊÌ iÊ`}Ì>ÊÌiÀÀiÃÌÀ>ÊÌÕiÀÃ]ÊÌ iÊ`}Ì>ÊÃ}>Ê«Ài«>À>ÌÊÕÌÃÊ
and the output converter. The channel strips are indicated in the head-end sta-
tion display with “
Bx …A
” and “
Bx …B
”. Using an adequate CA module en-
coded channels can be decoded via channel strip “
A
”. In addition cassette
PTDQ 1001 is able to encode uncoded channels via an adequate CA module.
The control of the cassette takes place via the control unit of the head-end sta-
tion.
Two LEDs provide an indication of the input signal quality based on their colour
and indicate if the respective channel strip is switched on (LED illuminates) or
off. The integrated TPS module (Transport Stream Processing) processes the
data of the transport streams.
The QAM modulated HF output signals are sent through the HF output of the
cassette to the HF output collector. The common output level of the channel strips
can be set at the output collector. Additionally a transport stream is made avail-
able via the ASI output dependent on the signal path set.
7 iÊÌ iÊ i>`i`ÊÃÌ>ÌÊÃÊÃÜÌV i`Ê]ÊÌ iÊÌÜiÊÊ`ë>ÞÊà ÜÃÊÌ iÊ
software version of the control unit. To operate this cassette the software version
of the control unit must be “
V 41
” or higher. You can find the current operating
ÃvÌÜ>ÀiÊvÀÊÌ iÊVÌÀÊÕÌÊ>`ÊÌ iÊV>ÃÃiÌÌi]ÊÌ iÊÃvÌÜ>Àiʺ
BE-Flash
” and the
current assembly instructions on the website “
www.gss.de
”.
The cassette is designed for use in the following head-end stations:
*-1Ê£Ó]Ê*-1Ên]Ê*/Ên
und PST 19-1.
HF output
ASI output
Modulator
"
B
"
Modulator
"
A
"
Combiner
TS
ASI
Transport stream 1
ASI input
Transport stream 2