Setting stuffing
SR=6900
(= “Number 1”): Active output symbol rate
Bx 4A
SR=6900 (6325)
STUFFING
Number 1 Number 2
(
6325
) (= “Number 2”):
The current measured output symbol rate.
If the station filter is activated, this value is lower than the
value of the “Number 1”. The value fluctuates, since the data
rates of individual services are dynamically modified by the
broadcasters.
• Use the
▶
◀
/
buttons to place the cursor under the
number to be changed (“Number 1”) and set the symbol
rate with the buttons
.
The value set corresponds to the new output symbol rate.
Increasing the value of “Number 1”.
—> The “Number 1” can be increased to any value up to
7500.
Reducing the value of “Number 1”.
—> With the station filter switched “
on
”, the “Number 1”
can be decreased. To do this, observe the “Number 2”
for approx. 30 seconds and note the highest value.
Add roughly 10 % to this value. Do not decrease the
“Number 1” lower than the value of “Number 2”.
Is the “Number 1” lower than “Number 2” question
marks “
??
” appear in the display.
Bx 4A
SR=6200 (6325) ??
STUFFING
Bx 4A
SR=6900 (6325)
STUFFING
Å
Ï
/
