GSS PMDQ 1000, Assembly Instructions Manual

Page: 25 / 54

- 25 - - 25 -
Selecting the input signal path
In this menu you define the signal path of the input transport
streams.
Menu setting “ A = 1 B = 2 ”
(s. chap. 2.4.1.1, page 6).
Menu setting “ A+B = 1 2 = OFF ”
(s. chap. 2.4.1.2, page 7).
• Use the buttons to select the signal path wished.
• Press the button.
—> The “Selecting the output signal path” – “ OUTROUTE ”
menu is activated.
Selecting the output signal path
In this menu you define the signal path of the output transport
streams.
Menu setting “
1 => MA 2 => MB
”
(s. chap. 2.4.2.1, page 7).
Menu setting “ 1 => ASI MA => OFF ”
(s. chap. 2.4.2.2, page 8).
Menu setting “
2 => ASI MB => OFF
”
(s. chap. 2.4.2.3, page 8).
Bx 4
A=1
INROUTE
B=2
A=1 B=2 /
A+B=1 2=OFF
1=>MA 2=>MB
1=>ASI MA=>OFF
2=>ASI MB=>OFF
Bx 4
1=>MA
OUTROUTE
2=>MB
Bx 4
108000 KBits
ASI RATE
Å Ï
/
Bx 4
108000 KBits
ASI RATE
Å Ï
/