GSS PEDQ 3005 QMX, Assembly Instruction Manual

Page: 23 / 28

- 23 - PEDQ 3005/4005/5005 QMX
• Use to call the stations to be activated / deactivated one after the
other and use to switch them on (" + ") or off (" – ").
• Use to activate the other channel strips (" B ", " C ", " D ") one after the
other and use as required to select stations and use to switch
them on (" + ") or off (" – ").
• Press the key:
—> The "Reading out the station filter" – " FILTER: " menu is activated.
Reading out the station filter
Note:
–
If channel strips have been switched on or off in the station filters, the station
filters are read out automatically. " read … " appears briefly in the display.
As soon as the reading process is completed, the "Setting the QAM modula -
tion" – " QAM: " menu appears (page 24).
– If
no
changes were made to the station filters "
Filter => read
" appears in
the display. The read-out process can be activated manually in this menu.
▶
Bx 4A
read … FILTER:
Bx 4B
read … FILTER:
Bx 4C
read … FILTER:
Bx 4D
read … FILTER:
Bx 4D
Filter
=> read
FILTER:
• If the data of unchanged station filters is
not
to be read out, press .
—> The "Setting the QAM modulation" – " QAM: " menu is displayed
(page 24).
• To read out the data of unchanged station filters manually, press .
—> The station filters of channel strips " A ", " B ", " C " and " D " are read out.