![GSS PADT 6400 Assembly Instructions Manual Download Page 31](http://html.mh-extra.com/html/gss/padt-6400/padt-6400_assembly-instructions-manual_2275433031.webp)
- 31 -
PADT 6400
lnb
osCill ator
frequenCy
, i
nPut
—> This menu is only displayed if "Tuner" is selected as input signal
In this menu select the SAT input and set the oscillator frequency of the LNB
used.
LNB
In A
Bx 4A
10600 MHz
• Use buttons
to place the cursor under the digit to be set for the oscil-
lator frequency displayed.
• Press buttons
to enter the respective digit of the oscillator frequency
of the LNB used.
• Repeat the procedure by the quantity of the digits to be set.
• Use button to place the cursor under "In A" resp. "In B".
• Press buttons
to select the respective SAT input ("A" or "B").
• Press the
button.
—> The "Input symbol rate, DVB mode" – "
SYMBOL
" submenu is activated.
i
nPut
symbol
r ate
, dvb
mode
—> This menu is only displayed if "Tuner" is selected as input signal
In this menu set the symbol rate of the desired transponder. The DVB mode is
indicated.
SYMBOL
DVB–S
Bx 4A
27500
Symbol rate:
The symbol rates of the satellite transponders can be found in the current chan-
nel table of the satellite operator, in various satellite magazines and in the
Internet.